Search
Now showing items 61-70 of 434
Ultrasonic signatures of idealized grout defects in polyethylene-sleeved cable stays
(Texas A&M University, 1992)
Not available
Incipient fault detection and identification in process systems using artificial neural networks
(Texas A&M University, 1992)
Not available
The Effects of Airflow Modulation and Multi-Stage Defrost on the Performance of an Air Source Heat Pump
(Texas A&M University, 1992)
Not available
The effects of atomic-oxygen-rich environments on the physical and mechanical properties of selected polymers
(Texas A&M University, 1992)
Not available
Environmental stress cracking of plastics under dynamic conditions
(Texas A&M University, 1992)
Not available
A Methodology to Develop Monthly Energy Use Models From Utility Billing Data for Seasonally Scheduled Buildings: Application to Schools
(Texas A&M University, 1998)
The measured energy savings from retrofits in buildings in the Texas LoanSTAR program are determined as the difference between the energy consumption predicted by a baseline model and the measured energy consumption during ...
Effect of Refrigerant Charge, Duct Leakage, and Evaporator Air Flow on the High Temerature Performance of Air Conditioners and Heat Pumps
(Texas A&M University, 1995)
An experimental study was conducted to quantify the effect of several installation items on the high outdoor ambient temperature performance of air conditioners. These installation items were: improper amount of refrigerant ...
The Effects of Outdoor Heat Exchanger Hydrophobic Treatment on the Performance of an Air Source Heat Pump
(Texas A&M University, 1995)
The effects of outdoor heat exchanger hydrophobic treatment on the performance of an air source heat pump were investigated. The base case tests used a bare aluminum outdoor heat exchanger in the experimental setup. The ...
Comparison of the Prediction Accuracy of Daily and Monthly Regression Models for Energy Consumption in Commercial Buildings
(Texas A&M University, 1996)
The measured energy savings from retrofits in commercial buildings are generally determined as the difference between the energy consumption predicted using a baseline model and the measured energy consumption during the ...
Measuring Retrofit Savings in Commercial Buildings with Pre-Retrofit Utility Billing Data and Post-Retrofit Sub-Metered Data
(Texas A&M University, 1993)
Methodologies to measure energy and dollar savings resulting from energy conserving retrofits in commercial buildings when both pre-retrofit and post-retrofit monitored data are available at an hourly or daily level have ...