Browsing by Subject "Transmission"
Now showing items 1-14 of 14
-
(Texas A&M University. Libraries, 1977)An analytical model for describing the heat transfer from the wall of a capillary groove to the fluid in the groove has been developed. This model couples a one-dimensional conduction model in the wall to the surface heat ...
-
(Texas A&M University. Libraries, 1988)An experimental investigation, at a Reynolds number of 100,000, was conducted to determine the flow field and heat transfer characteristics of a model composed of three cylinders of different diameter. A wide range of ...
-
(Texas A&M University. Libraries, 1992)A transient heat and mass transfer model was developed to predict ceiling heat gain/loss through the attic space in residences and to accurately estimate savings in cooling and heating loads produced by the use of radiant ...
-
(Texas A&M University. Libraries, 1991)This dissertation details an experimental investigation of the influence of high mainstream turbulence on leading edge film cooling heat transfer. High mainstream turbulence was produced by a bar grid (Tu = 3.3-5.1%), a ...
-
(Texas A&M University. Libraries, 1979)A finite element method is developed for the analysis of two dimensional, transient laminar convective heat transfer. The method is applied to three classes of problems over a range of flow and thermal conditions. The ...
-
(Texas A&M University. Libraries, 1993)The influence of mainstream turbulence and unsteady wake on turbine blade surface heat transfer was studied. The experiments were performed with a five-blade linear cascade in a low speed wind tunnel facility. The wake and ...
-
(Texas A&M University. Libraries, 1992)Local heat transfer in an enclosed corotating disk with axial throughflow was investigated. The rotating cavity has two plane disks and a cylindrical rim (shroud). The ratio of the rim span to the disk outer radius is 0.4 ...
-
(Texas A&M University. Libraries, 1993)The cooling performance of two dimensional channel flow simulating channels of electronic components has been studied numerically. A channel is formed with the substrates on which the heat sources are surface-mounted ...
-
(2014-12-09)Rift Valley fever virus (RVFV) is a mosquito-borne virus in the family Bunyaviridae that has spread throughout continental Africa to Madagascar and the Arabian Peninsula. The establishment of RVFV in North America would ...
-
(Texas A&M University. Libraries, 1992)Due to the low thermal conductivity and high emissivity of UO2, it has been suggested that radiative heat transfer may play a significant role in the transport of heat through the pores of UO2 used as a nuclear fuel. This ...
-
(Texas A&M University. Libraries, 1986)The heat transfer resulting from the impingement of a heated circular jet upon a cylinder was experimentally studied. Velocity and temperature profiles of the impinging jets compared favorably with existing theoretical ...
-
(Texas A&M University. Libraries, 1986)This work presents the results of an experimental investigation into the effects of variations in the channel aspect ratio and rib angle-of-attack, on the friction factor and local heat transfer in rectangular channels ...
-
(Texas A&M University. Libraries, 1992)This dissertation presents a comprehensive experimental investigation of the effects of V-shaped ribs on the heat transfer enhancement and the increased pressure drop for turbulent air flow in a square channel. The test ...
-
(Texas A&M University. Libraries, 1993)HCFC-22 and HFC-134a were used with short tube orifices having length to diameter ratios ranging from 5 to 20 in a 9.53 mm (3/8 in.) refrigerant line to investigate both two-phase and subcooled liquid flow entering the ...