Browsing by Subject "Cooling"
Now showing items 1-8 of 8
-
(2022-01-25)A cold resistor is a device/circuitry/system emulating an active resistor which has lower effective noise temperature than the temperature of its environment. This dissertation contains three main studies of the cold ...
-
(Texas A&M University. Libraries, 1991)This dissertation details an experimental investigation of the influence of high mainstream turbulence on leading edge film cooling heat transfer. High mainstream turbulence was produced by a bar grid (Tu = 3.3-5.1%), a ...
-
(Texas A&M University. Libraries, 1992)Local heat transfer in an enclosed corotating disk with axial throughflow was investigated. The rotating cavity has two plane disks and a cylindrical rim (shroud). The ratio of the rim span to the disk outer radius is 0.4 ...
-
(2011-02-22)Improvements to gas turbine efficiency depend closely on cooling technologies, as efficiency increases with turbine inlet temperature. To aid in this process, simulations that consider real engine conditions need to be ...
-
(Texas A&M University. Libraries, 1985)A two dimensional finite element model was used to predict the temperature and surface heat transfer coefficient in the cooling of beef carcasses. The middle of the loin was the location chosen for modeling. The model was ...
-
(Texas A&M University, 2007-04-25)A computational study of three-dimensional turbulent flow and heat transfer was performed in four types of rotating channels. The first type is a rotating rectangular channel with V-shaped ribs. The channel aspect ratio ...
-
(2019-12-15)
-
Implantable Medical Devices (IMDs) are a category of medical devices that include pacemakers, implantable cardiac defibrillators, spinal cord stimulators, and many other devices. Many of these devices are battery-powered ...