Browsing by Author "Bidaut, Yves"
Now showing items 1-12 of 12
-
Bidaut, Yves; Muller, Ch. (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)
-
Bidaut, Yves; Dessibourg, Dominique (Turbomachinery Laboratories, Texas A&M Engineering Experiment Station, 2016)Lecture 11: The axial thrust is basically generated by a pressure imbalance across the impeller. The impeller is subjected to a great force trying to move it against the incoming flow. The cumulative thrust of all impellers ...
-
Bidaut, Yves; Dessibourg, Dominique (Texas A&M University. Turbomachinery Laboratories, 2014)The axial thrust is basically generated by a pressure imbalance across the impeller. The impeller is subjected to a great force trying to move it against the incoming flow. The cumulative thrust of all impellers on the ...
-
Bidaut, Yves; Dessibourg, Dominique| (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2015)The axial thrust is basically generated by a pressure imbalance across the impeller. The impeller is subjected to a great force trying to move it against the incoming flow. The cumulative thrust of all impellers on the ...
-
Somaini, Reto; Urs, Baumann; Bidaut, Yves (Texas A&M University. Turbomachinery Laboratories, 2012)Wherever a variable speed gas compression train is needed for Oil & Gas upstream applications as well as for gas storage applications the primary decision has to be made between a gas turbine driver and an electric motor ...
-
Bidaut, Yves (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2021) During the mechanical running test of a HP centrifugal compressor, the rotorexperienced a sudden increase of the radial vibrations During run-down thecompressor experienced a trip and high vibrations were recorded ...
-
Bidaut, Yves (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2013)For the purpose of maintenance requirements or for some applications in the chemical industry (for instance chlorine) the centrifugal compressor must be designed with a horizontally (axially) split casing. Beyond the ...
-
Bidaut, Yves; Baumann, Urs (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2011)Background: 2 parallel trains consisting of a Low Pressure (LPC) and High Pressure (HPC) compressors were supplied for an offshore reinjection application near the coast of Angola. During the commissioning on site large ...
-
Bidaut, Yves (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2018)During the mechanical test of a centrifugal compressor, the rotor experienced a sudden increase of the radial vibrations. After re-start, the compressor showed unacceptably high vibrations. The RCA revealed: The vibrations ...
-
Bidaut, Yves; Baumann, Urs; Al-Harthy, Salim Mohamed Hamed (Texas A&M University. Turbomachinery Laboratories, 2009)Extensive stability measurements were performed during the full-load, full-pressure factory testing of a five-stage inline centrifugal compressor. The compressor, tested up to a maximum discharge pressure of 655 bar (9,500 ...
-
Bidaut, Yves; Somaini, Reto; Ruguê, Mônica Alves de Lima (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station; Texas A & M University. Libraries, [2019])Many centrifugal compressor rotordynamic stability investigations have been performed over the last 40 years. Rules, based on the large experience and knowledge are defined to ensure compressor stability in operation. The ...
-
Bidaut, Yves (Turbomachinery Laboratory, Texas A&M Engineering Experiment Station, 2022)During the commissioning of a Main Air Compressor in an Air Separation Unit, the rotor showed increased radial vibrations at the Non-Drive End probe. The RCA revealed: The vibration resulted from the excitation ...