Browsing by Title
Now showing items 44854-44873 of 121333
-
(Texas A&M University, 1999)The concept of using an infrared (IR) source for drying proposes is not a new one, yet the application of this technology in the paper industry has been slow to gain acceptance. Recent advances in the design, construction, ...
-
(Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)A new type air heater was developed, and an experimental set-up was built to analyze its characteristics. Within the Reynolds number from 2000 to 15000, the integrated characteristics in air heater channels with and without ...
-
(Texas A&M University, 2000)Modern gas turbines have high inlet temperatures to harness maximum power output, which causes different components to experience severe thermal stresses and fatigue. To achieve turbine blade durability goals, the blades ...
-
(Texas A&M University, 1992)Not available
-
(Texas A&M University, 1997)A number of experimental laboratory studies on grouting technologies have been reported in the literature. However, most of these studies are not applicable to subsurface barrier containment of nonaqueous phase liquids ...
-
(Texas A&M University. Libraries, 1979)Laboratory hydraulic facture experiments are conducted on monolithologic and dilithologic layered rock specimens as a function of interfacial normal stress to determine the relative influence of the interfacial shear ...
-
(2011-02-22)Using a hydrogen donor and a catalyst for upgrading and increasing oil recovery during in situ combustion is a known and proven technique. Based on research conducted on this process, it is clear that widespread practice ...
-
(2010-01-16)Experimental studies showed the feasibility of adding metallic catalysts and tetralin for the upgrade and increased recovery of heavy oil during the in situ combustion process. Further experimental studies also showed the ...
-
(2012-07-16)This research is a study of the in-situ upgrading of Jobo crude oil using steam, tetralin or decalin, and catalyst (Fe(acac)₃) at temperatures of 250 °C, 275 °C and 300 °C for 24 hours, 48 hours and 72 hours using an ...
-
(Texas A&M University, 1991)Not available
-
(Texas A&M University, 1990)Not available
-
(Texas A&M University, 1984)Not available
-
(Texas A&M University, 1994)Not available
-
(Texas A&M University, 1981)Not available
-
(2014-12-17)I report my studies of Mn12O12(C6H5COO)16(H2O)4, which will be referred to as Mn12-Ph, a single molecule magnet, on Cu(111) and HOPG (highly oriented pyrolytic graphite) surfaces by scanning tunneling microscopy (STM). A ...
-
(Texas A&M University, 1999)Considerable research and testing have been conducted for the improvement of basic thermal recovery processes and for the development and application of other methods of reservoir heating. Effects of various additives ...
-
(2016-12-01)High-velocity jetting of acid in carbonate formations as a stimulation technique is an emerging technology currently being studied for applications in long horizontal wells. One way to achieve this is by using limited entry ...
-
(Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 2006)In a whole building, there are integrated multiple theories regarding porosity moisture- conditioned material. In this experiment, we tested the humidity-controlling performance and evaporative cooling performance of the ...
-
(2014-08-06)The goal of this research is to better understand upstream Oil & Gas Electric Submersible Pump (ESP) reliability issues. The objective of this research is to determine how Liquid-Gas-Particulate (LGP) turbine pump wear ...
-
(Texas A&M University. Libraries, 1974)Both the fission and alpha decay of recoils from the reactions of ²³⁷Np with ³He and ⁴He ions and reactions of ²³⁰Th with ¹⁰B were studied. Dielectric detectors and in-flight decay techniques were used to search for fission ...