Numerical and Experimental Analysis of Multi-Stage Axial Turbine Performance at Design and Off-Design Conditions

Date

2013-08-07

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

Computational fluid dynamics or CFD isan importanttool thatis used at various stages in the design of highly complex turbomachinery such as compressorand turbine stages that are used in land and air based power generation units. The ability of CFD to predict the performance characteristics of a specific blade design is challenged by the need to use various turbulence models to simulate turbulent flows as well as transition models to simulate laminar to turbulent transition that can be observed in various turbomachinery designs. Moreover, CFD is based on numerically solving highly complex differential equations, which through the use of a grid to discretize the geometry introduces numerical errors. Allthese factors combine to challenge CFD’s role as a predictor of blade performance. It has been generallyfound that CFD in its current state of the art is best used to compare between various design points and not as a pure predictor of performances. In this study the capability of CFD, and turbulence modeling, in turbomachinery based geometry is assessed.Three different blade designs are tested, that include an advanced two-stage turbine blade design, a three stage 2D or cylindrical design and finally a three stage bowed stator and rotor design. Allcases were experimentally tested at the Texas A&Muniversity Turbomachinery Performance and Flow Research Laboratory (TPFL).In all cases CFD provided good insights into fundamental turbomachinery flow physics, showing the expected improvement from using 2D cylindrical blades to 3D bowed blade designs in abating the secondary flow effects which are dominant loss generators.However, comparing experimentally measured performance results to numerically predicted shows a clear deficiency, where the CFD overpredicts performance when compared to experimentallyobtained data, largely underestimating the various loss mechanisms. In a relative sense, CFD as a tool allows the user to calculate the impact a new feature or change can have on a baseline design. CFD will also provide insight into what are the dominant physics that explain why a change can provide an increase or decrease in performance. Additionally,as part of this study, one of the main factors that affect the performance of modern turbomachinery is transition from laminar to turbulent flow.Transition is an influential phenomena especially in high pressure turbines, and is sensitive to factors such asupstream incidentwake frequency and turbulence intensity.A model experimentally developed, is implemented into a CFD solver and compared to various test results showing greater capability in modeling the effects of reduced frequency on the transition point and transitional flow physics. This model is compared to industry standard models showing favorable prediction performance due to its abilityto account for upstream wake effects which most current model are unable to account for.

Description

Keywords

Turbomachinery, CFD, Secondary Flows, Turbines

Citation