Show simple item record

dc.contributor.advisorYu, Choongho
dc.creatorNarayanunni, Vinay
dc.date.accessioned2010-07-15T00:17:03Z
dc.date.accessioned2010-07-23T21:47:34Z
dc.date.available2010-07-15T00:17:03Z
dc.date.available2010-07-23T21:47:34Z
dc.date.created2010-05
dc.date.issued2010-07-14
dc.date.submittedMay 2010
dc.identifier.urihttps://hdl.handle.net/1969.1/ETD-TAMU-2010-05-7865
dc.description.abstractTransport Properties of Nanocomposites were studied in this work. A Monte Carlo technique was used to model the percolation behavior of fibers in a nanocomposite. Once the percolation threshold was found, the effect of fiber dimensions on the percolation threshold in the presence and absence of polymer particles was found. The number of fibers at the percolation threshold in the presence of identically shaped polymer particles was found to be considerably lower than the case without particles. Next, the polymer particles were made to be of different shapes. The shapes and sizes of the fibers, as well as the polymers, were made the same as those used to obtain experimental data in literature. The simulation results were compared to experimental results, and vital information regarding the electrical properties of the fibers and fiberfiber junctions was obtained for the case of two stabilizers used during composite preparation ? Gum Arabic (GA) and Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS). In particular, the fiber-fiber connection resistances, in the case of these 2 stabilizers, were obtained. A ratio between the fiber path resistance and the total connection resistance, giving the relative magnitude of these resistances in a composite, was defined. This ratio was found through simulations for different fiber dimensions, fiber types and stabilizers. Trends of the ratio with respect to composite parameters were observed and analyzed, and parameters to be varied to get desired composite properties were discussed. This study can serve as a useful guide to choose design parameters for composite preparation in the future. It can also be used to predict the properties of composites having known fiber dimensions, fiber quality and stabilizing agents.en
dc.format.mimetypeapplication/pdf
dc.language.isoeng
dc.subjectCarbon nanotube polymer composites Percolation Electrical propertiesen
dc.titleTransport Properties of Nanocompositesen
dc.typeBooken
dc.typeThesisen
thesis.degree.departmentMechanical Engineeringen
thesis.degree.disciplineMechanical Engineeringen
thesis.degree.grantorTexas A&M Universityen
thesis.degree.nameMaster of Scienceen
thesis.degree.levelMastersen
dc.contributor.committeeMemberN K, Anand
dc.contributor.committeeMemberSon, Dong Hee
dc.type.genreElectronic Thesisen
dc.type.materialtexten


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record