Magnetic field-induced phase transformation & power harvesting capabilities in magnetic shape memory alloys
MetadataShow full item record
Magnetic Shape Memory Alloys (MSMAs) combine shape-change/deformationrecovery abilities of heat driven conventional shape memory alloys (SMA) and magnetic field driven magnetostrictives through martensitic transformation. They are promising for actuator applications, and can be employed as sensors/power-harvesters due to their capability to convert mechanical stimuli into magnetic response or vice versa. The purpose of the present work was to investigate magneto-thermo-mechanical (MTM) response of various MSMAs, under simultaneously applied magnetic field, heat and stress. To accomplish this, two novel testing systems which allowed absolute control on magnetic field and stress/strain in a wide and stable range of temperature were designed and manufactured. MTM characterization of MSMAs enabled us to determine the effects of main parameters on reversible magnetic field-induced phase transformation (FIPT), such as magnetocrystalline anisotropy energy, Zeeman energy, stress hysteresis, thermal hysteresis, critical stress to start stress induced phase transformation and crystal orientation. Conventional SMA characteristics of single crystalline Ni2MnGa and NiMnCoIn and polycrystalline NiMnCoAl and NiMnCoSn MSMAs were investigated using the macroscopic MTM testing system to reveal how these conventional properties were linked to magnetic-field-induced actuation. An actuation stress of 5 MPa and a work output of 157 kJm?3 were obtained by the field-induced martensite variant reorientation (VR) in NiMnGa alloys. FIPT was investigated both in Ni2MnGa MSMA and in NiMnCoIn metamagnetic SMA. It proved as an alternative governing mechanism of field-induced shape change to VR in Ni2MnGa single crystals: one-way and reversible (0.5% cyclic magnetic field induced strain (MFIS) under 22 MPa) stress-assisted FIPTs were realized under low field magnitudes (< 0.7 Tesla) resulting in at least an order of magnitude higher actuation stress levels than those in shape memory alloys literature. The possibility of harvesting waste mechanical work as electrical power by means of VR in NiMnGa MSMAs was explored: without enhanced pickup coil parameters or optimized power conditioning circuitry, 280 mV was harvested at 10 Hz frequency within a strain range of 4.9%. For the first time in magnetic shape memory alloys literature, a fully recoverable MFIS of 3% under 125 MPa was attained on single crystalline metamagnetic SMA NiMnCoIn by means of our microscopic MTM testing system to understand the evolution of FIPT under simultaneously applied magnetic field and stress. Conventional SMA characteristics of polycrystalline bulk NiMnCoAl and sintered compacted-powder NiMnCoSn metamagnetic SMAs were also investigated, with and without applied field.
Basaran, Burak (2009). Magnetic field-induced phase transformation & power harvesting capabilities in magnetic shape memory alloys. Doctoral dissertation, Texas A&M University. Available electronically from