Fast Algorithms for High Frequency Interconnect Modeling in VLSI Circuits and Packages
MetadataShow full item record
Interconnect modeling plays an important role in design and verification of VLSI circuits and packages. For low frequency circuits, great advances for parasitic resistance and capacitance extraction have been achieved and wide varieties of techniques are available. However, for high frequency circuits and packages, parasitic inductance and impedance extraction still poses a tremendous challenge. Existing algorithms, such as FastImp and FastHenry developed by MIT, are slow and inherently unable to handle multiple dielectrics and magnetic materials. In this research, we solve three problems in interconnect modeling for high frequency circuits and packages. 1) Multiple dielectrics are common in integrated circuits and packages. We propose the first Boundary Element Method (BEM) algorithm for impedance extraction of interconnects with multiple dielectrics. The algorithm uses a novel equivalentcharge formulation to model the extraction problem with significantly fewer unknowns. Then fast matrix-vector multiplication and effective preconditioning techniques are applied to speed up the solution of linear systems. Experimental results show that the algorithm is significantly faster than existing methods with sufficient accuracy. 2) Magnetic materials are widely used in MEMS, RFID and MRAM. We present the first BEM algorithm to extract interconnect inductance with magnetic materials. The algorithm models magnetic characteristics by the Landau Lifshitz Gilbert equation and fictitious magnetic charges. The algorithm is accelerated by approximating magnetic charge effects and by modeling currents with solenoidal basis. The relative error of the algorithm with respect to the commercial tool is below 3%, while the speed is up to one magnitude faster. 3) Since traditional interconnect model includes mutual inductances between pairs of segments, the resulting circuit matrix is very dense. This has been the main bottleneck in the use of the interconnect model. Recently, K = L-1 is used. The RKC model is sparse and stable. We study the practical issues of the RKC model. We validate the RKC model and propose an efficient way to achieve high accuracy extraction by circuit simulations of practical examples.
Yi, Yang (2009). Fast Algorithms for High Frequency Interconnect Modeling in VLSI Circuits and Packages. Doctoral dissertation, Texas A&M University. Available electronically from