Show simple item record

dc.creatorChijuka, Ekene F
dc.date.accessioned2012-06-07T23:12:28Z
dc.date.available2012-06-07T23:12:28Z
dc.date.created2002
dc.date.issued2002
dc.identifier.urihttps://hdl.handle.net/1969.1/ETD-TAMU-2002-THESIS-C432
dc.descriptionDue to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item.en
dc.descriptionIncludes bibliographical references (leaves 78-79).en
dc.descriptionIssued also on microfiche from Lange Micrographics.en
dc.description.abstractThe objective of this study is the development of a reservoir characterization of the Appleton Oil Field, Escambia County, Alabama, using petrophysical data, reservoir performance data and reservoir simulation. Appleton Field is comprised of two producing zones, the "Smackover" and the "Reef," which, as the names imply, are presumed to be separate and distinct geological sequences. In particular, the previous work of several authors delineated a marked difference in these zones based on the quality of the reservoir rocks and their productivity. In one particular study of the Appleton Field, the authors utilized only two wells in their analysis. In contrast, our study involves the use of all five producing wells in the field. The data available for these five wells confirms the differences in reservoir quality between the "Smackover" and the "Reef" producing intervals, although such differences vary from well to well. In this study we also provide a detailed description of Appleton Field using production data analysis and reservoir simulation, both of which reveal possible untapped oil reserves. The volumes of oil in place obtained from our analyses exceed those reported in literature for this field. However, the previous literature noted specifically a possible underestimation of the reported oil in place and the use of infill drilling to exploit these untapped resources The original oil in place (OOIP) using production data was estimated to be 78.8 million STB, which exceeds the reported value of 3.8 million STB by more than a factor of 20. An average recovery factor of 3.4 percent (using production to date) was calculated using the estimated ultimate recovery (or EUR) technique. This result is much lower than the 68 percent reported in literature. The history matched reservoir simulation model utilized an oil-in-place of 11.84 million STB and we obtained a recovery factor of 23 percent (using production to date). We recognize this extremely large variation in computed in-place volume, and it is our contention that an aquifer system is providing this "extra" energy (hence, extra volume). The energy from the aquifer appears to be provided in the form of fluid expansion and water influx (i.e., the production data show no clear "water influx" signal). Based on the variation of OOIP computed from our analysis, we have estimated a lower limit of 5 million STB and an upper limit of 30 million STB OOIP, and we believe that the true OOIP lies somewhere in between (most likely on the order of 20 million STB of oil). Resolution of this issue will require additional data. In particular, we require pressure data to calibrate the simulation, as well as the well performance analysis. We would also like to have a modern fluid sample (oil) made available for a complete PVT analysis.en
dc.format.mediumelectronicen
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.publisherTexas A&M University
dc.rightsThis thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use.en
dc.subjectpetroleum engineering.en
dc.subjectMajor petroleum engineering.en
dc.titleIntegrated reservoir study of the Appleton Oil Field, Escambia County, Alabamaen
dc.typeThesisen
thesis.degree.disciplinepetroleum engineeringen
thesis.degree.nameM.S.en
thesis.degree.levelMastersen
dc.type.genrethesisen
dc.type.materialtexten
dc.format.digitalOriginreformatted digitalen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.

Request Open Access