NOTE: This item is not available outside the Texas A&M University network. Texas A&M affiliated users who are off campus can access the item through NetID and password authentication or by using TAMU VPN. Non-affiliated individuals should request a copy through their local library's interlibrary loan service.
Failure modes and design optimization for re-usable corrugated cases
dc.creator | Karuppoor, Srinand S. | |
dc.date.accessioned | 2012-06-07T22:49:13Z | |
dc.date.available | 2012-06-07T22:49:13Z | |
dc.date.created | 1997 | |
dc.date.issued | 1997 | |
dc.identifier.uri | https://hdl.handle.net/1969.1/ETD-TAMU-1997-THESIS-K37 | |
dc.description | Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item. | en |
dc.description | Includes bibliographical references. | en |
dc.description | Issued also on microfiche from Lange Micrographics. | en |
dc.description.abstract | The objective of this thesis is to study and analyze the distribution and usage of reusable corrugated cardboard cases in the delivery of the product within the Frito-Lay system. The studies conducted looked at the various modes by which the cases fail and their effect on the fife of a case. Various case designs were tried in these studies to analyze the effect of the parameters like presence of string, in tackling the modes of failure and in improvement of the life of the case. The tests were conducted under normal operating conditions. The cases were introduced into the system in tune to the plant production. Cases that were returned were sorted and checked for damage. The damaged test cases that were deemed unsuitable for re-use were stored for examination. The examination of these cases revealed the type of failure and failure location. Additional data from the cases were also taken like, the number of trips, design code, etc. These data were entered into the computer and analyzed. The thesis contains analysis and results from three studies. Tests for the first study were run in Irving and Rosenberg plants, in Texas region. Additionally, to confirm the results from the Irving test, further runs were conducted in the Kilfingly plant, New York. The data and analysis of this study was the second part of this thesis. The third study is on the effect of variations of the width of the flap of a case to the load carrying capacity of the flaps when fan folded. Based on the results of these studies, recommendations have been made on the case design and handling procedures, which have a significant economic impact on the Frito-Lay system. | en |
dc.format.medium | electronic | en |
dc.format.mimetype | application/pdf | |
dc.language.iso | en_US | |
dc.publisher | Texas A&M University | |
dc.rights | This thesis was part of a retrospective digitization project authorized by the Texas A&M University Libraries in 2008. Copyright remains vested with the author(s). It is the user's responsibility to secure permission from the copyright holder(s) for re-use of the work beyond the provision of Fair Use. | en |
dc.subject | mechanical engineering. | en |
dc.subject | Major mechanical engineering. | en |
dc.title | Failure modes and design optimization for re-usable corrugated cases | en |
dc.type | Thesis | en |
thesis.degree.discipline | mechanical engineering | en |
thesis.degree.name | M.S. | en |
thesis.degree.level | Masters | en |
dc.type.genre | thesis | en |
dc.type.material | text | en |
dc.format.digitalOrigin | reformatted digital | en |
Files in this item
This item appears in the following Collection(s)
-
Digitized Theses and Dissertations (1922–2004)
Texas A&M University Theses and Dissertations (1922–2004)
Request Open Access
This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.