Show simple item record

Visit the Energy Systems Laboratory Homepage.

dc.creatorHaverlah, D.
dc.creatorRiordon, K.
dc.date.accessioned2008-05-16T16:17:07Z
dc.date.available2008-05-16T16:17:07Z
dc.date.issued1994
dc.identifier.otherESL-HH-94-05-32
dc.identifier.urihttps://hdl.handle.net/1969.1/6652
dc.description.abstractIn 1986 LCRA embarked on residential load management to control peak summer loads. At that time, LCRA was considered a summer peaking utility, and residential air conditioning and water heating systems were selected for control. The program was suspended in 1989 because of defects with the cycling switch printed circuit boards. While these problems were corrected in 1989 and 1990, it was decided to leave the program on hold and conduct engineering tests to determine program impacts. In addition, in 1991 the scope of the pilot studies were expanded to investigate the possibility of redesigning the program so that both summer and winter peak load reductions could be realized. This paper presents the major events of the pilot test program and also quantifies some of the results. The pilot work is continuing and additional information will be available in the future.en
dc.publisherEnergy Systems Laboratory (http://esl.tamu.edu)
dc.publisherTexas A&M University (http://www.tamu.edu)
dc.titleResidential Load Management Program and Piloten
dc.contributor.sponsorLCRA


This item appears in the following Collection(s)

Show simple item record