Show simple item record

Visit the Energy Systems Laboratory Homepage.

dc.creatorAndre, P.
dc.creatorLacote, P.
dc.creatorAparecida Silva, C.
dc.creatorHannay, J.
dc.creatorLebrun, J.
dc.date.accessioned2007-04-27T16:43:48Z
dc.date.available2007-04-27T16:43:48Z
dc.date.issued2004
dc.identifier.otherESL-IC-04-10-52
dc.identifier.urihttps://hdl.handle.net/1969.1/5080
dc.description.abstractIn the context of the IEA40 research project, a specification of a “Functional Test Procedure” was progressively developed using the CA-MET building in Namur as real size test bench for the application and validation of the procedure. The target system is a typical VAV system devoted to the ventilation, cooling and air conditioning functions. The procedure consists in a series of operations to be applied to the system, considered as a set of connected components and taking into account the following constraints: 1) time availability 2) intrinsic limitations of the system 3) reference performances. The proposed procedure is divided in two sets of actions: 1) a number of preliminary actions allowing to take the best benefit of the subsequent phases: a) identification of available measurement points b) identification of actuators characteristics c) identification of control strategies d) aeraulic network calculations e) selection of measurement techniques and experimental design 2) the verification tasks themselves: The philosophy of the verification process is to bring the system into a number of states which allowed each specific check to be carried out. The organisation of the procedure tries to optimize the time spent for commissioning by logically sequencing the operations according to the following order: 1) test in manual (ie not controlled by the BEMS) operation 2) test in manual (ie not controlled by the BEMS) stop 3) test in normal operation 4) test at maximum flowrate 5) test at minimum flowrate 6) test in automatic stop The paper will provide the specific operations to be carried out at each step and will illustrate the whole process with the prototyping work performed on the CA-MET building in Namur.en
dc.format.extent63847 bytesen
dc.format.mimetypeapplication/pdf
dc.language.isoen_US
dc.publisherEnergy Systems Laboratory (http://esl.tamu.edu)
dc.publisherTexas A&M University (http://www.tamu.edu)
dc.titleA Functional Test Procedure for the improved commissioning of a VAV systemen


This item appears in the following Collection(s)

Show simple item record