Modeling defective part level due to static and dynamic defects based upon site observation and excitation balance
MetadataShow full item record
Manufacture testing of digital integrated circuits is essential for high quality. However, exhaustive testing is impractical, and only a small subset of all possible test patterns (or test pattern pairs) may be applied. Thus, it is crucial to choose a subset that detects a high percentage of the defective parts and produces a low defective part level. Historically, test pattern generation has often been seen as a deterministic endeavor. Test sets are generated to deterministically ensure that a large percentage of the targeted faults are detected. However, many real defects do not behave like these faults, and a test set that detects them all may still miss many defects. Unfortunately, modeling all possible defects as faults is impractical. Thus, it is important to fortuitously detect unmodeled defects using high quality test sets. To maximize fortuitous detection, we do not assume a high correlation between faults and actual defects. Instead, we look at the common requirements for all defect detection. We deterministically maximize the observations of the leastobserved sites while randomly exciting the defects that may be present. The resulting decrease in defective part level is estimated using the MPGD model. This dissertation describes the MPGD defective part level model and shows how it can be used to predict defective part levels resulting from static defect detection. Unlike many other predictors, its predictions are a function of site observations, not fault coverage, and thus it is generally more accurate at high fault coverages. Furthermore, its components model the physical realities of site observation and defect excitation, and thus it can be used to give insight into better test generation strategies. Next, we investigate the effect of additional constraints on the fortuitous detection of defects-specifically, as we focus on detecting dynamic defects instead of static ones. We show that the quality of the randomness of excitation becomes increasingly important as defect complexity increases. We introduce a new metric, called excitation balance, to estimate the quality of the excitation, and we show how excitation balance relates to the constant τ in the MPGD model.
Subjectdigital circuit testing
automatic test pattern generation
MPG-D defective part level prediction
MPG-D defect level modeling
DO-RE-ME deterministic observation--random excitation--MPG-D defective part level estimation
Dworak, Jennifer Lynn (2005). Modeling defective part level due to static and dynamic defects based upon site observation and excitation balance. Doctoral dissertation, Texas A&M University. Texas A&M University. Available electronically from
Showing items related by title, author, creator and subject.
An investigation of defect detection using random defect excitation and deterministic defect observation in complex integrated logic circuits Dworak, Jennifer (Texas A&M University, 2013-02-22)aWhenever integrated circuits are manufactured, a certain percentage of those circuits will be defective. Defective circuits present problems for both the manufacturers who wish to maintain a good reputation with their ...
Optimizing Test Pattern Generation Using Top-Off ATPG Methodology for Stuck–AT, Transition and Small Delay Defect Faults Gill, Arjun (2013-05-01)The ever increasing complexity and size of digital circuits complemented by Deep Sub Micron (DSM) technology trends today pose challenges to the efficient Design For Test (DFT) methodologies. Innovation is required not ...
The use of mouse models to elucidate the genetic and environmental components of neural tube defects Gefrides, Lisa Anne (Texas A&M University, 1998)Neural tub defects (NTDs) rank among the most common phics. congenital anomalies affecting human infants worldwide. Unfortunately, the: etiology is poorly understood accuse the genetic and environmental components contributing ...