Now showing items 1-17 of 17

    • Pastor, E.; Kuznetsov, S. B. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1982)
      For the past several years substantial use has been made of a class of motors developed for application in driving loads which operate at multiple speed points to gain efficiency. While adjustable frequency power supplies ...
    • Wilcox, R. J.; Nedwick, R. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      Modern process synthesis techniques were applied to the design of a new aromatics extraction and distillation plant and resulted in very attractive energy savings. Techniques used included targeting, ∆Tmin optimization, ...
    • Smith, L. A., Jr.; Hearn, D.; Wynegar, D. P. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      Catalytic Distillation' refers to a chemical process which performs both a catalyzed reaction and primary fractionation of the reaction components simultaneously. A structured catalyst which also is an effective distillation ...
    • Manuel, E. H., Jr. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      COGEN3 is computer software that combines the capabilities for: conceptual engineering design, costing, economic optimization, and financial evaluation of cogeneration projects. COGEN3 considers the problems of equipment ...
    • Thunem, C. B.; Schebler, S. J.; Love, G. I. (Energy Systems Laboratory (http://esl.tamu.edu), 1986-06)
      The Iowa Methodist Medical Center of Des Moines, Iowa, is installing two 1,500 kW Fairbanks-Morse turbocharged dual-fuel reciprocating engine-generators. The system will be installed with recovery of exhaust waste heat ...
    • Good, R. L. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      The step increase in energy cost brought about in 1973 has permanently changed the way in which petrochemical production facilities are designed, operated, and maintained. Highly visible energy conservation programs ...
    • Howell, H. D.; Vera, R. L. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      This paper describes application considerations, design criteria, design features, operating characteristics and performance of a 200 MW combined cycle cogeneration plant located at Occidental Chemical Corporation's ...
    • James, A. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1982)
      Today's energy availability and pricing structure has focused attention upon those design techniques which result in an improvement in the level of energy utilisation. Energy integration is one such technique, where this ...
    • Wilson, J. W.; Sloan, H. D. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      The FCC process continues as one of the major refinery technologies despite changes in refinery operations. The main fractionator/vapor recovery systems associated with many FCC units have the potential for significant ...
    • Diamante, L.; Nagengast, C. (Energy Systems Laboratory (http://esl.tamu.edu), 1979)
      Fuel costs are rapidly escalating. The overall efficiency of any energy utilization must be improved immediately. Steam traps - though a hardware item which received little attention can substantially effect the overall ...
    • McKee, H. B.; Kympton, H. W.; Arnold, J. W.; Paisan, J. J. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1980)
      The design, operating characteristics, and energy savings from an energy recovery system employed on a potato chip fryer which became operational in December, 1979, is discussed. The design incorporates a modification to ...
    • Gilbert, J. S. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1982)
      After evaluating numerous waste heat sources and heat pump designs for energy recovery, we have become aware that a great deal of confusion exists about the economics of heat pumps. The purpose of this article is to present ...
    • White, T. L. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1980)
      This paper discusses actual design and modifications for increased system efficiency and includes reduced chilled liquid flow during part load operation, reduced condensing and increased evaporator temperatures for reduced ...
    • Bundalli, N. (Energy Systems Laboratory (http://esl.tamu.edu), 1986-06)
      An extensive research project to derive guidelines for the design of a reliable bin-feeder system for biomass materials has been completed. The new system uses a converging mass flow hopper with a much smaller outlet ...
    • Chatterjee, N.; Suchdeo, S. R. (Energy Systems Laboratory (http://esl.tamu.edu); Texas A&M University (http://www.tamu.edu), 1984)
      The optimum performance of a distillation system can be evaluated by examining the product purities, the product recoveries, and the system's capability to respond to small or large, expected or unexpected, plant disturbances. ...
    • Kalina, A. I.; Leibowitz, H. M. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      For any given heat source, only a portion of the thermal energy may be converted into useful work. The amount of energy which may be converted from any form into mechanical energy is referred to as exergy. The ratio ...
    • Rebello, W. J.; Guerrero, P. S.; Goodell, P. D. (Energy Systems Laboratory (http://esl.eslwin.tamu.edu), 1987-09)
      This paper describes the development of a concept to utilize metal hydrides to recover hydrogen from industrial off-gas streams. The activity included a survey of industrial waste streams a selection of metallic hydriding ...