Application of Fast Marching Method in Shale Gas Reservoir Model Calibration
MetadataShow full item record
Unconventional reservoirs are typically characterized by very low permeabilities, and thus, the pressure depletion from a producing well may not propagate far from the well during the life of a development. Currently, two approaches are widely utilized to perform unconventional reservoir analysis: analytical techniques, including the decline curve analysis and the pressure/rate transient analysis, and numerical simulation. The numerical simulation can rigorously account for complex well geometry and reservoir heterogeneity but also is time consuming. In this thesis, we propose and apply an efficient technique, fast marching method (FMM), to analyze the shale gas reservoirs. Our proposed approach stands midway between analytic techniques and numerical simulation. In contrast to analytical techniques, it takes into account complex well geometry and reservoir heterogeneity, and it is less time consuming compared to numerical simulation. The fast marching method can efficiently provide us with the solution of the pressure front propagation equation, which can be expressed as an Eikonal equation. Our approach is based on the generalization of the concept of depth of investigation. Its application to unconventional reservoirs can provide the understanding necessary to describe and optimize the interaction between complex multi-stage fractured wells, reservoir heterogeneity, drainage volumes, pressure depletion, and well rates. The proposed method allows rapid approximation of reservoir simulation results without resorting to detailed flow simulation, and also provides the time-evolution of the well drainage volume for visualization. Calibration of reservoir models to match historical dynamic data is necessary to increase confidence in simulation models and also minimize risks in decision making. In this thesis, we propose an integrated workflow: applying the genetic algorithm (GA) to calibrate the model parameters, and utilizing the fast marching based approach for forward simulation. This workflow takes advantages of both the derivative free characteristics of GA and the speed of FMM. In addition, we also provide a novel approach to incorporate the micro-seismic events (if available) into our history matching workflow so as to further constrain and better calibrate our models.
SubjectFast Marching Method
Shale Gas Reservoir
Yang, Changdong (2013). Application of Fast Marching Method in Shale Gas Reservoir Model Calibration. Master's thesis, Texas A & M University. Available electronically from