NOTE: This item is not available outside the Texas A&M University network. Texas A&M affiliated users who are off campus can access the item through NetID and password authentication or by using TAMU VPN. Non-affiliated individuals should request a copy through their local library's interlibrary loan service.
Development of design criteria pertaining to signing, pavement markings, and geometric cross-section for improved two-lane section (Texas Super 2)
Abstract
The purpose of this research was to establish the optimum driver information strategy regarding Super 2 passing lane sections in Texas. A Driver Survey and a Before and After Study examining proposed skip stripe pavement marking, signing, and roadway geometrics associated with the proposed development of Super 2 roadways were conducted in order to make this determination. The survey and field studies were conducted during Summer 2001. The Driver Survey was conducted in three groups of surveys encompassing five TxDOT Districts; Amarillo/Childress, Odessa, and San Angelo/San Antonio. These locations were selected due to the possibility of Super 2 passing lane roadways being constructed in these areas. A total of 141 individuals took part in the survey. The survey consisted of questions associated with signing, the skip stripe pavement marking being researched, pavement marking associated with passing, and geometric design features of passing lane sections. The field studies were performed along highway US 83 near Childress, Eden, and Leakey Texas. These locations are within Texas Department of Transportation (TxDOT) Districts where Super 2 passing lanes may be constructed in the near future. Analysis of the data collected during the Before and After Studies consisted of traffic characteristics of speed, headway, volume, and vehicle class. This information was collected through pre-programmed traffic classifiers and video taken at each study site and then analyzed to determine driver behavior as a result of the proposed skip stripe marking and related signing plan. Site visits to areas within Texas and around the country were conducted as a part of the research and to examine different options available related to the signing, marking, and geometric design of Super 2 passing lanes. Ultimately design criteria pertaining to the recommended signing and marking of Super 2 passing lanes were developed and presented in the form of a standard detail design sheet convenient for immediate use by TxDOT in practical highway design applications.
Description
Due to the character of the original source materials and the nature of batch digitization, quality control issues may be present in this document. Please report any quality issues you encounter to digital@library.tamu.edu, referencing the URI of the item.Includes bibliographical references (leaves 89-90).
Issued also on microfiche from Lange Micrographics.
Collections
Citation
Heard, Barry Don (2001). Development of design criteria pertaining to signing, pavement markings, and geometric cross-section for improved two-lane section (Texas Super 2). Master's thesis, Texas A&M University. Available electronically from https : / /hdl .handle .net /1969 .1 /ETD -TAMU -2001 -THESIS -H41.
Request Open Access
This item and its contents are restricted. If this is your thesis or dissertation, you can make it open-access. This will allow all visitors to view the contents of the thesis.